Florida solar potential

Solar Savings Calculator

Estimate solar payback period and long-term savings in Florida using real solar production data.

Solar savings estimate

System inputs

Pre-filled with Florida solar data

A typical residential rooftop system ranges from about 5 to 10 kW.

Switch the unit to enter either a total project cost or a cost per watt.

Defaulted to the average rate in Florida. Edit it if your utility bill shows a different rate.

Results

Savings & payback

Annual savings

$1,067

Payback period

16.9 yrs

25-year net savings

$8,675

Production breakdown

Annual production

8,114 kWh

Total install cost

$18,000

Production per kW

1,352 kWh

Rate used

13.2¢/kWh

How it works

The calculator multiplies your system size by the estimated annual production per kilowatt for your location to get total annual output in kWh, then values that output at your electricity rate to estimate annual savings.

Payback period is your total install cost divided by annual savings. 25-year net savings projects that same annual savings forward and subtracts the upfront cost — it does not account for panel degradation, rate changes, or maintenance.

The production estimate above reflects solar resource data for Florida. Actual output depends on roof angle, shading, panel efficiency, and local weather patterns.

Solar potential in Florida

As of June 2026, a solar system in Florida can be expected to produce roughly 1,352 kWh per kilowatt of installed capacity each year, based on solar resource data from NREL. Use the calculator above to estimate payback period and long-term savings for a specific system size and cost.

Check another state

Solar production varies by climate and latitude. Compare your state's potential against any other.